Find the battery-release latch and press down onto it with one hand, and then pull the battery from the case, setting the laptop computer battery aside.
The convenience provided by the portability of a laptop can
become a hindrance because of the screen malfunctions? it isn't easy to
connect a new monitor as possible with a desktop technique. If the backlight
from the LCD screen has failed, you can see any kind of image. To fix the
problem, the entire inverter board and it is connected LCD cable will require
to be manually replaced. Here below are the instruction for the
reference.
1. Check within the manual of your netbook or search the infomation with
the Internet to support the portion of the manufacturer抯 websites. Simply
get that what design fo inverter board you'll need for your computer, consider
my Pavilion DV2000 Display as instance, I buy a right one from a reputable site, HooToo. com, after which i fix it by myself.
2. Turn off the laptop抯 operation system. Turn off the LCD screen
lid. CTurn the whole laptop over therefore the bottom end of the case is facing
up towards you. Locate the battery-release latch and press down onto it
with one hand, and then pull the battery from the case, setting the laptop computer battery aside.
3. Locate the rubber pieces about the edges and top of the LCD. Pop the
stopper pieces off of the case by inserting a flat object underneath
them after which pulling out toward a person. Use a screwdriver to take out the
screws hidden underneath the stoppers.
4. Put the laptop back over and offered the LCD screen support.
Slide a flat and thin object, such like a screwdriver, directly
underneath the seam from the plastic bezel underneath typically the LCD screen.
Wiggle the screwdriver down and up gently until the bezel pops from the
case. Lift the bezel up and check to see if there is some sort of cable running to
the actual motherboard. Disconnect the cable when there is one.
5. Pull the situation on the screen towards you, and then remove them from
the laptop. Locate the inverter board at the bottom of the screen plus
find the cable running in the inverter board to the actual motherboard. Pull
off the strip of tape about the board and remove any screws holding it for
place if there are any in your particular model of computer. Disconnect
the cable in the motherboard.
6. Connect the actual motherboard cable for plastic bezel and place typically the bezel
back onto the actual laptop case. Finally, just put the battery to the laptop
and power this on, and then when the manufacturer抯 logo appear about the
screen, it mean that you're successfull to install the brand new inverter
board and cable television rightly.
Article Tags:
Inverter Panel